Revo X - Errors or Warnings
      Back to home
      1. Orotig Knowledge Base
      2. Welding
      3. Revo X - Errors or Warnings

      Revo X - CODE N°: 10 ERR_FLUX2

      The water flow rate lts/min read by the second pump's sensor is lower than the correct working threshold or it's not present

      1. Check water tank level, if it's low, refill it to the maximum
      2. Tap on the setting icon(wrench key) on the left side menu and press ON on the TEST PUMP. If the pump is priming correctly and the flow rate is visible but not enough, check and clean the pump's filter draining completely the tank before
      3. Contact your dealer or open a new ticket to request Service support, if you purchase the unit directly