Evo White - Error 1: Cooling liquid flux failure

The water flow rate lts/min read by the pum's sensor is lower than the correct working threshold or it's not present.

1. Check water tank level, if it's low, refill it to the maximum. 
2. In the stand-by menù, press on "Options" button then press on "H2O" button. Press ON to prime the pump manually. Check the water flux value, it must be in the green area between 5 and 8 lts/min. If the sound of the waterflow is not smooth but noisey and vibrating, take video of the issue and attach as a media in a Service ticket.
3. Contact your dealer or open a new ticket to request Service support, if you purchase the unit directly.